Basic Info.
Product
Ultra High Pressure Washer
Driven Type
Electric Motor / Diesel Engine
Pressure
800-2800 Bar, 10000-40000 Psi
Flow Rate
30 - 100L/M, 6.6- 26.1 G/M
Plunger Material
Ceramics
Filter
Double Precised Filter
Option Configuration
Screw Air Pump
Lubricating System
Force Lubricating Oil Pump
Hose Length
100m or as Request
Product Description
Specification for RST-60L-1 Product sliding door operator:
1, Main Control Unit
Advanced PHILIPS computer control chip is used in the main control unit in the field of current automatic door industry, and fuzzy control technology in the software is used, it can automatically measure the weight as well as the impact of surroundings to the door body, and the best operating parameter can be available to ensure safe and reliable operation of thee door.
2, Drive Unit
The module-style driving circuit is used in the main drive of the sliding door, and DC permanent magnet servo motors is adopted, and DC chopper control technology is employed, it features with excellent running and control, automatic door with infinite speed control, low noise (noise in 40dB), and stable operation and free of maintenance. Insulation class: F class.
3, Electro-mechanical Lock
The lock operation can be completed safely and reliably on the electronic -mechanical lock designed in SLM automatic door. Under the condition that the loop detection is used to the security performance of the lock, the flip-flop control mode is adopted, that is the power is switched only at the moment when the lock is opened or closed, thus shortening the power on time of the electromagnetic coil, in this way but only the energy consumption is saved but also the service life of the electronic -mechanical lock.
4, Infrared anti- nip Controller
To prevent the situation that people are clamped during process of automatic closing door, the SLM sliding door can equipped with infrared anti- nip controller sensing sensor, when someone enters orbit of the automatic door, the of infrared light of the infrared sensor is blocked, automatic doors remain open position to ensure the safety of people. The maximum of open gate area captured is 5 meters.
5, SDC Panel Controller
SDC controller is a two-lane data communication dedicated remote controller (the substitute of handheld terminal) directly connected to the main control unit BUS, it is small, nice, rapid in installation, easy to use, and it can be used within 50 meters:
* Functional Shift
* Setting for Operation Parameter
* Function Status
* Fault self-diagnosis Display Option
Open Mode:
1, Sensor Open Mode
2, Coded Lock Open Mode
3, Card Swiping Open Mode
4 Button Open Mode
Function Description
1, Self-test Function
2, Automatic, random fault diagnosis;
3, Panel Function of SDC
A, control Function (Operating Mode)
B, Adjustment of Operating Parameters
C, Programmed Setting Function (31setting function in total), including:
4, Failure Indication Function
Interference
* Effective measures are used to eliminate interference to units of the control system, such as use of filter, interference rejection circuits and shielding;
* EMC meets the provisions of 89/336/EEC.
Safety
* Regulate the open / close speed of the automatic door in accordance with the weight of the door wing to eliminate any collision on the passer;
* Automatic Anti-nip Function:
Others
In addition to the above mentioned functions, the problem can be resolved by compromise if additional functions are still needed based on practical applications the user requires, Such as:
* Set up network with the user for centralized control and management; * Static and Dynamic Remote Display of the Automatic Door;
* Automatic Door Remote Alarm (Sound, Light); *Additional Manual Emergency Operation for automatic Door;
Technical Parameters:
* Applied Voltage: 220V, 50Hz, Current: 5A * Rated Power: 100W
* Maximum Power Consumption: 200W * Maximum Driving Force (Static): 300KG
* Ambient Temperature: -25 C ~ +75 C * Relative Humidity: 65% Maximum
* Maximum Clear Opening Width: 3000mm * Largest Load of Wing of Automatic Door: 100kg × 2
* Running Noise: ≤ 40dB
Address:
No. 419, Mayuan Road, Ningbo, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Construction & Decoration, Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, ISO 9000, IATF16949, QC 080000
Company Introduction:
Ningbo RST Automatic Door Co., Ltd. established in 2003 which is the leading automatic door manufacturer in China. We have three production bases covering 70, 000 square meters and more than 150 employees. Our automatic door annual production capacity is 1000 sets of automatic revolving doors and 6000 sets of automatic sliding doors.
RST has attained ISO9001, ISO14001, and CE certifications. During the past 7 years, we have been enjoying the biggest market share in local automatic door industry.
RST′s automatic door products have been exported to more than 30 countries like US, England, Japan, Spain, Australia, South Africa, Mexico and etc. We enjoyed a good reputation among our clients around the world, for the qualified products of automatic door and professional service we provided.