- Model NO.: Automatic Curtain machine RST-C12
- Transport Package: Inner Box+ Carton
- Origin: China
- Trademark: RST
- Specification: Length: 1m ~ 10m
- HS Code: 6303990090
The sling wheel has good operating performance, and the sling wheel is connected to the pulley, when the cover of the pulley is opened, they can be easily separated or connected.
Separate and connect the easy-used lazy arm.
It is easy to separate and connect the lazy arm, which can be increased or decreased as needed.
Create a sense of oneness and slender design
The quickly installed pulley
Only if install the electric machine driving shaft in the hole of "driving pulley", the installation can be completed. As the automatic locking device is equipped, the separation and connection can be properly acted.
Automatic Stop Sensor for Electric machine
The built-in automatic stop sensor can stop the electric machine properly, positioning settings are not required.
Powerful 24V DC electric machine with low noise
The BS curtain electrical machine is a kind of DC motor. It has a dual feature with dynamic power and low noise with (The safe load is 25Kg when both ends are opened and closed), the weight of the electric machine is 710g, it can work by contacting the transformer to DC-220V AC power supply.
Hand, electric dual-use
An electronic clutch is installation inside the motor, it can easily to use no matter electric or manual operation is acted.
Curtain Hook of the End
Install it on the "drive pulley", and properly fix the end of opening and closing curtains.
The track of automatic curtain machine made in China is firm in structure, and the coating with high quality is used.
The basic length is 5m, and the longest straight rail can be 12m (The splicing is required).
The light veneering aluminum material is used in the BS automatic curtain machine. High-quality transmission belt is used, it has strengthened steel belt embedded, and it not easy to be distorted and deformed.
Other performance characteristics of RST automatic curtain machines
RST automatic curtain machine is an open and close curtain electric machine with high-performance by use of advanced technology from France.
Individual Straight Guide Rail
The curved rail can be made in the automatic curtain machine from RST to meet requirements of on-site situation.
No on-site Preparation
The size of this curtain can be customized in accordance with the requirement. The Installation of this curtain is similar to common open & close curtains, and it can work by connecting the power supply to the electrical machine after the electric machine is installed on the guide rail.
Installation of Bracket
Special original mounting bracket is allocated the guide rail, so the installation is very simple.
Installation of Accessories
Usually they are installed under the ceiling. In case they are to be installed on the wall, choose a special "Side Mounting Bracket. "
Multiple open and close ways
On-way or two -way open.
Long service life
The service life can be up to 10 years based on calculation on 5 times of open and close daily.
Three categories of the combinations
RST motor, Orbit, Power
Flexible motor, Orbit, Power
RST motor, Orbit, Power, DC opening bus master and control switch
Flexible motor, Orbit, Power, Yixin DC opening bus master and control switch
RST motor, Orbit, Power, Single-channel controller
RST motor (Built-in RTS wireless receiver), Orbit, Power, Single-channel controller
Normal voltage, Maximum current, Uptime, Speed of retractable screens, Maximum speed of retractable screens, Minimum speed of retractable screens, Maximum length of the direct rail concatenation, Basic length of the single orbit, Safety load of direct rail under 12m
The load of straight track less than 12m can be greater than 25kg, please enquire ABD company for the load on curved guide